Categories
Engineering

I have chosen based on the recommended topics but more indept explanation. Hope

I have chosen based on the recommended topics but more indept explanation. Hope you will follow the guidelines. Hope to hear from u soon. make sure references are clear, don’t plagiarize.

Categories
Engineering

A report focusing on determining the potential effects of a roundabout, how chan

A report focusing on determining the potential effects of a roundabout, how changing the parameters influences its performance, and how best to optimise the capacity & performance

Categories
Engineering

The purpose of this exercise is to produce a programme for a project. This will

The purpose of this exercise is to produce a programme for a project. This will be achieved by inputting details of the activities and subsequently generating a bar chart. In doing so, the critical path of the project will be determined.Project details
The project to be used for the exercise is the construction of a simplistic road bridge as part of a larger motorway construction project.
**************************************
Deliverables
You should produce the following in a clearly laid out manner:
i) A critical path network
ii) A bar chart with logic links
iii) An explanation of your network
**************************************Please watch the video through the Google Drive linkhttps://drive.google.com/file/d/1zdYPFCx-QOZNzQo18-aJLdE1kFU5EzXK/view?usp=sharing

Categories
Engineering

Assignment on Finite Element Analysis Use the finite element (FE) software, MIDA

Assignment on Finite Element Analysis
Use the finite element (FE) software, MIDAS Gen, or any other FE software
1- Create an FE model for the slab.
2- Carry out an FE analysis, considering the boundary conditions that are provided by the columns, and the permanent and variable loads as below. Characteristic permanent loads: self weight plus 1.5 kN/m2 for partitions.
Characteristic variable load: 4 kN/m2
Assume the building is braced against wind loading.
Slab thickness: find the smallest thickness, rounded to the nearest 25mm, such that the vertical deflection does not exceed the permissible limit of EC2.
Pattern loading on the slab must be considered, but not the flexural stiffness of the columns.Output: you are required to produce a 1000 words technical report that includes the following:• Explanation of the methodology that was used to model and analyse the slab.
• A plan of the geometrical model.
• Contour lines of deflected shape, bending stresses and shear stresses.
• A table showing maximum deflections against different slab thicknesses.
• Explanation about the loading used.
• Recommendation on the smallest slab thickness to use, and the reasoning behind it.
• 10 marks for showing the punching shear calculations as per the Eurocodes.
• 10 marks for showing the effect of refining the mesh.
• 10 marks for discussing ways of decreasing the self weight of the slab.

Categories
Engineering

TEST ORDER NOT A REAL ORDERTEST ORDER NOT A REAL ORDERTEST ORDER NOT A REAL ORDE

TEST ORDER NOT A REAL ORDERTEST ORDER NOT A REAL ORDERTEST ORDER NOT A REAL ORDERTEST ORDER NOT A REAL ORDER

Categories
Engineering

I think the four assessment tasks are – bsbstr601 assessment task 1, bsbstr601 assessment task 2, bsbstr601 simulation pack and bsbstr601 project portfolio.

I have attached everything to complete the tasks, please go through the attached documents and you will have an idea to complete the assignment. I think the four assessment tasks are – BSBSTR601 Assessment Task 1, BSBSTR601 Assessment Task 2, BSBSTR601 Simulation Pack and BSBSTR601 Project Portfolio.

Categories
Engineering

Also, please find where i cam improve my paper and where i need to modify.

Please check my grammar and sentence structure. Also, Please find where I cam improve my paper and where I need to modify.

Categories
Engineering

Make sure to add pic of snowboard and relevant info and charts, continue with this pptx folder snowboard that i send you.

make sure to add pic of snowboard and relevant info and charts, continue with this pptx folder snowboard that i send you. apa format

Categories
Engineering

The project description sheet describes everything required.

The Project Description sheet describes everything required. The excel file (project template) that has to be filled out is attached and all the articles that have to be used for this Project are also attached. Overall, the excel file has to be filled out, a presentation of max 10 slides has to be made and a 1200 word written user guide has to be made for the excel file

Categories
Engineering

These are explained more in the pictures below.

This project will involve designing and implementing the mechanism to control the flight control surfaces of an aircraft using a fly-by-wire control algorithm transmitting commands from the control column to the surfaces. my audience are first year aerospace students to have a brief knowledge about the three main flight control surfaces. these are explained more in the pictures below. I have to make a design of a joystick with microcontrollers that makes the roles of each of the three flight control surfaces.